取扱説明書

AQUASTEP User Guide

What's in the box

• One pair of AQUASTEP inflatable boots
• Air Pump only if ordered separately (+¥3,000)

How to inflate

1. Unpack and inspect both boots for damage.
2. Locate the air valve on each boot.
3. Connect a compatible pump using a suitable adapter.
4. Inflate gradually.
5. Do not exceed the manufacturer's maximum pressure.
6. Close all valves securely.
7. Check the product for damage and air leaks before use.

Compatible pumps

A standard compatible pump with a suitable adapter can be used once compatibility with the valve is confirmed. The valve type will be published when confirmed. Prefer a ready option? Add AQUASTEP Air Pump — ¥3,000

After use

Rinse with fresh water, especially after salt water, and let air out slowly through the valve.

Cleaning & storage

• Clean with mild soap and water; avoid solvents and sharp objects.
• Dry completely before storing.
• Store deflated, away from direct sunlight and heat.

Safety information

AQUASTEP is a recreational product, not tested or certified equipment for walking on water. It does not replace certified life-saving equipment and must not be used on open or deep water. No load capacity or pressure rating has been confirmed. Use only in shallow, calm water, under adult supervision, and wear a certified life jacket.